Netscape NETSCAPE DIRECTORY SERVER 6.1 - ADMINISTRATOR, Руководство администратора

Страница: 302 / 578

Configuring Multi-Master Replication
302 Netscape Directory Server Administrator’s Guide • August 2002
❍
Repeat the operation for every supplier bind DN you want to include in
the list. Click Save when you have finished.
This supplier bind DN should correspond to the entry created in Step 2.
Note that the supplier bind DN corresponds to a privileged user, because it
is not subject to access control.
g.
Specify any supplier servers to which you want to refer updates.
By default, all updates are first referred to the supplier servers that you
specify here. If you specify none, updates are referred to the supplier
servers that have a replication agreement that includes the current replica.
Automatic referrals assume that clients will perform a simple bind, and
therefore, are of the form
ldap://
servername
:
port
. If you want clients to
bind to the supplier using SSL, you can use this field to specify a referral of
the form
ldaps://
servername
:
port
where the
s
in
ldaps
indicates secure
connections.
4.
Click Save to save the replication settings for the replica.
5.
Repeat these steps for every read-only replica in your replication
configuration.
Configuring the Read-Write Replicas on the
Supplier Servers
Perform these steps on each supplier server:
1.
On Server A and Server B, specify the supplier settings for each server.
a.
In the Directory Server Console, click the Configuration tab.
b.
In the navigation tree, highlight the Replication node.
c.
In the right-hand side of the window, click the Supplier Settings tab.
d.
Check the Enable Change Log checkbox.
This activates all of the fields in the pane below that were previously
greyed out.
e.
Specify a change log by clicking the Use Default button, or click the Browse
button to display a file selector.