Netscape NETSCAPE DIRECTORY SERVER 6.02 Скачать руководство пользователя страница 288

Страница: 288 / 568

Detailed Replication Tasks

288

Netscape Directory Server Administrator’s Guide • May 2002

To configure supplier settings:

In the Directory Server Console, click the Configuration tab.

For information on starting the Directory Server Console, “Using the Directory
Server Console,” on page 28.

In the left navigation tree, highlight the Replication node.

In the right navigation window, click the Supplier Settings tab.

Check the Enable Change Log checkbox.

This activates all of the fields in the pane below that were previously grayed
out.

Specify a change log by clicking the Use Default button, or click Browse to
display a file selector.

Set the change log number and age parameters.

You must clear the unlimited checkboxes to specify different values.

Click Save to save the supplier settings.

Configuring a Read-Write Replica

For each read-write replica, you must specify the appropriate replication settings.

To configure a read-write replica:

In the Directory Server Console, click the Configuration tab.

For information on starting the Directory Server Console, “Using the Directory
Server Console,” on page 28.

In the left navigation tree, expand the Replication folder and highlight the
database to replicate.

The Replication tab is displayed in the right navigation window.

Check the Enable Replica checkbox.

In the Replica Role section, select the Single Master or Multi-Master radio
button.

Содержание NETSCAPE DIRECTORY SERVER 6.02

























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание NETSCAPE DIRECTORY SERVER 6.02

Отзывы:

Бренды по названию

Популярные бренды

Netscape NETSCAPE DIRECTORY SERVER 6.02, Руководство администратора

Результаты поиска

Содержание NETSCAPE DIRECTORY SERVER 6.02

Отзывы:

Бренды по названию

Популярные бренды