Netscape Certificate Management System 6.1, Руководство администратора

Страница: 440 / 840

Setting Up Certificate Profiles
440 Netscape Certificate Management System Administrator’s Guide • February 2003
b.
The Policy Rule Editor window contains two tabs, Defaults and
Constraints.
Defaults define attributes that populate the certificate request that will be
used to create the issued certificate. These can be extensions, validity
periods, or other fields contained in the certificates. Constraints define
valid values for the defaults.
Change the values in the Defaults tab to change the value of a parameter.
Change the values in the Constraints tab to change the value of the
constraint applied to this policy. Some values can be edited by clicking into
the value field and changing the entry; others have pull down menus
associated with them where you can pick the values available from the pull
down menu.
See “Defaults Reference,” on page 448 and “Constraints Reference,” on
page 473 for complete information about the available defaults and
constraints.
c.
Click Ok.
To delete a policy:
a.
Select the policy.
b.
Click delete.
9.
Set up Inputs in the Inputs tab of the Certificate Profile Rule Editor window.
The inputs tab lists inputs that have been set up for this certificate profile. You
can add an input or you can delete an input. You can select an input and then
select edit; but since the input has no parameters or other settings, there is
nothing to configure.