41
IP / Port Filter Settings
Items
Information
Enable This Rule
Select to enable or disable the IP/Port filter
function.
Source IP Address /
Port Range
Fill in the source IP address and port range that
you wish to filter.
Destination IP
Address / Port Range
Fill in the destination IP address and port range
that you wish to filter.
Protocol
Select the protocol type of TCP, UDP or Both.
Comment
Input any text to describe this mapping, up to 16
alphanumerical characters.
Apply / Reset Button
After configure the above settings, click
Apply
to
add a new list in the following IP / Port Filter
Rule List; or click
Reset
to reset all the setting.
* Please click on the
Save Settings
button or the
Reset Settings
button on the above table
to save/reset the configurations.
IP / Port Filter Rule List
Lists the IP / Port Filter Settings you have added before. Mark the checkbox and
then click on the
button to delete lists, or
button to
clear.
