NETROME TETRAGON NT-404, Руководство пользователя

Страница: 24 / 33

3.4.2.2 TIME ADJUST
Move the cursor to the TIME ADJUST using
▲ , ▼ buttons.
Press the ENTER button of the remote to get the below Screen.
Select “ON” or “OFF” using the ( +) or ( -) buttons when the cursor is on “INTERNET TIME ADJUST”.
If the INTERNET TIME ADJUST is “ON”, the time of NT-404 will be adjusted to the time offered by
the internet server.
The Default value for INTERNET TIME ADJUST should be “OFF”.
** There are 10 kinds of internet server to supply GMT in this NT-404.
Move the cursor using the
▲ , ▼ buttons and then set the IP address of SELECT TIME SERVER
using the ( + ) or ( - ) buttons .
⑤
Set the correct TIME ZONE standardizing GMT(Greenwich Mean Time).
Move the cursor to the DAYLIGHT SAVING TIME(Summer time) using the ( + ) or ( - ) buttons of
the remote to make “ON” or “OFF”.
⑦ If the DAYLIGHT SAVING TIME set “ON”, set up the starting date and time and end date and
time. Use the ▲ , ▼ buttons to move the cursor and use the (-), (+) buttons to change the value.
The Default Value for DAYLIGHT SAVING TIME should be “ OFF”.
⑧ To exit this TIME ADJUST menu, press the ESC button.
3.4.3 VIDEO STANDARD
Move the Cursor to the VIDEO STANDARD using
▲ , ▼ button from the remote controller.
The Default value is “ AUTO”.
Note : User cannot select either NTSC or PAL as it has got only 1 parameter i.e AUTO.
3.4.4 KEY ECHO
Move the cursor to KEY ECHO of the SYSTEM SETUP Menu using
▲ , ▼ button.
Set” ON” or “ OFF” using ( + ) or ( - ) of the remote.
ON: The beep sounds when you press any button on the remote.
OFF :The beep sound doesn’t work.