WARRANTY
NetPeppers GmbH guarantees for a period of 12 months from date of sale that the
product, if used properly in accordance with the operating instructions is free of
material and processing errors
.
CUSTOMER SERVICE:
NetPeppers GmbH
Perchastr. 8e, 82319 Starnberg Germany
Tel.: +49-89-219097300
www.netpeppers.com
WEEE Reg.-Nr. DE24330012.
Quick Start Guide
WFM-100 WIFI/USB Fiber
Optic Video Microscope
www.netpeppers.com
ENGLISH
FUNCTIONALITY
1)
Power On/Off & Quickswitch (WIFI/USB) Button: Hold the key for 3sec to turn the
device on or off; double click to switch the mode between WiFi and USB.
2)
Light indicator (WIFI/USB): Blue light represents the Wi-Fi mode, green light
represents the USB mode.
3)
Reset: Hold and press the key for 5sec or above to restart the device.
4)
Focus wheel: Flip the wheel back or forth to adjust the focus.
5)
Capture: Press the key to take a snapshot of the connector.
6)
Illuminator: Emergency use in insufficient lighting environment
7)
Retaining nut: Lock the adaptor to secure the location.
8)
Interchangeable tip: Various tips are available for inspecting various connectors.
9)
Battery indicator: Light will be on for 5sec once illuminator power button is pressed
to show the battery status. When the battery level is too low, the light will flash.
10)
Illuminator power: Turn on or off the illuminator.
11)
Micro-USB Port: To connect to PC or mobile via USB cable; for charging
when the power is too low.
12)
Light indicator (charging): Red light represents charging status, green light
represents the fully-charged status.
FIRST STEPS
1)
Download the FiberEye2 App from App Store on your mobile device
2)
Power on the WFM-100 with the power button on the probe
PLEASE NOTE:
Make sure that the battery power of the probe is
charged more then 10%. If not, the probe has not enough power to build a
wifi connection with your mobile device.
3)
Check the light indicator on the probe. For wireless connection the LED
must represent blue light. Double press the power button on the probe to
switch between USB/WIFI connection.
4)
Turn on your wifi connection on your mobile device and look for a wifi
network starting with letters „FE-xxxxx“. Connect with this device.
5)
The probe ask for standard password: Standard password: 12345678
6)
our mobile device is now connected with the probe and you can see the
video inspection on your screen
12)
Light indicator (Charging)
3)
Reset
1)
Power On/Off & W
4)
Focus wheel
2)
Light indicator
5)
Capture
6)
Illuminator
7)
Retaning nut
8)
Interchangeable tip
9)
Batteries indicator
10)
Illuminator power:
11)
Micro-USB-port