Netopia TP12-CU, Руководство по установке

Страница: 11 / 16

10/100 Multi-Station Tap
7
Connecting to the Monitoring Device
1 . Supply power to the Tap using the two redundant power supplies included
with the unit . Verify that the Power LED illuminates .
2 . Connect Monitor Port A to the appropriate port on the monitoring device
using a CAT5 straight-through cable .
3 . Connect Monitor Port B to the appropriate port on the monitoring device
using a CAT5 straight-through cable .
Note: _______________________________________________________________
The second power supply is available to support the flow of traffic to the
monitoring device in the event that the first power supply becomes
unavailable.
______________________________________________________________________
Figure 6: Connecting to the Monitoring Device
4 . Repeat Steps 2-3 for each monitoring device you wish to connect to the
10/100 Multi-Station Tap .
To monitoring device
To monitoring device
19 20 17 18 15 16 13 14 11 12 9 10 7 8 5 6 3 4 1 2
®
A
B
A
B
A
B
A
B
A
B
High Density Tap 10/100 Ethernet
Monitor
1
2