Verify your package contents.
Cayman 3341
Stand (optional)
CD-ROM
and Quickstart Guide
USB Cable
(Blue)
RJ-45
Ethernet Cable
(Yellow)
DSL Filters
Two-way
Telephone Adapter
Your package may also include:
M a k i n g B r o a d b a n d W o r k
™
3
Power Supply
1
4
Unpack the Cayman 3341
Cayman
®
3341
Quickstart Guide
RJ-11
Telephone Cable
(Lavendar)
2
Install DSL Filters
1. Install a DSL filter on every telephone (or another telephone device, such as a fax
machine or caller-id box) that shares your DSL line, as shown.
2. If the phone jack where you plan to plug in your Cayman 3341 is already
connected to a telephone or telephone device, use the two-way telephone
adapter to connect both the Cayman 3341 and your telephone or telephone
device to the same jack.
Telephone Wall Jack
Line-sharing
Filter
Phone
Telephone Wall Jack
Line-sharing
Filter
Phone
Two-way
Telephone Adapter
3341 Smart Modem
2
1
Set up the Cayman 3341
Telephone
Wall Jack
AC Power
Telephone
Cable
(lavender)
USB Cable
(Blue)
2
4
1
2
4
Power
Switch
3
1
1. Place the Cayman 3341 near your PC or another location that permits easy access
and visibility. You can lay the Cayman 3341 flat, or stand it upright using the stand
if supplied as an option.
Make sure any Ethernet cables are kept away from power cords, fluorescent
lighting fixtures, and other sources of electrical interference. Put the Cayman
3341 in a location where air can circulate freely around it.
2. Connect the Power Supply to the power jack labeled on the back panel of the
Cayman 3341. Plug the Power Supply into the nearest electrical outlet.
3. Turn on the power using the power switch.
The
Power
light should come on solid green.
4. Connect the lavender RJ-11 Telephone Cable from the DSL port labeled on the
Cayman 3341 to the phone jack that supports your DSL service.
The
DSL Sync
indicator light should blink for up to two minutes and then come
on solid green.
5. (PCs using Microsoft Windows only) Insert the CD-ROM into your PC’s CD-ROM
drive.
The Cayman Installation Wizard will assist configuring your PC to work with the
Cayman 3341. The Cayman Installation Wizard will launch automatically.
a. If both the Ethernet and USB ports are available on your PC, the Cayman
Installation Wizard will ask you to decide whether you want to use the
Ethernet Cable
or
the USB Cable to connect to the Cayman 3341. Alternatively,
you may use both ports on the Cayman 3341, provided that no more than two
users are connected at one time. Make your selection and proceed.
b. When the Cayman Installation Wizard prompts you, connect the cable as
shown in the following diagrams for the first computer:
USB Connection method (Windows-based PCs only)
Connect the Cayman 3341’s USB port labeled to the USB port on your PC
using the blue USB Cable. The
USB Active
light should come on solid green.
The Cayman Installation Wizard will automatically install USB drivers for your
USB connection and launch your Web browser.
Unless you are also using the Ethernet port, skip the Ethernet Connection
method step and go directly to the
Configure the Cayman 3341
step on page 6.
