background image

NM-POCDOME

B/W

Color

Day/Night

 Color

Camera Assembly

NM-POCDOME-BB

NM-POCDOME-CB

Black

NM-POCDOME-HB

Available in Black:

B/W camera          Color camera       Day/Night Color     Housing

Power Input

Connects to 24V DC wall 

transformer (included) 

and AC outlet.

F-Connector

Connects to camera 

F-Connector with a single 

coax such as RG6. 

RCA Video Out

Connects to viewing 

device such as monitor, 

DVR, TV, or modulator.

PoC Video Decoder (Included)

NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona  85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com

Power over Coax Camera

NM-POCDOME

Indoor Dome

MAN-POCDOME     REV0703A

Camera Bracket

Adjust for desired field of view.

Camera Base

Install on walls or ceilings.

Camera Dome

Rotate to match camera field of 

view. Twist and remove to access 

Camera Bracket.

F-Connector

Transmits both power and video 

across a single coax.

PoC Video Encoder built into camera
Includes PoC Video Decoder module
One Wire Video™ Installation
Uses one cable cable to camera
Excellent image quality
Compact and lightweight
Internally routed cables
Mounts directly to walls and ceilings
Works in low light conditions
Adjustable camera angles
Tamper resistant wiring
Includes power supply
1 year limited warranty

FEATURES

Product Includes:

1. Camera Assembly (Camera Base, Camera Dome, Camera Bracket, Camera Lens, 
    PoC Video Encoder, F-Connector). 
2. NetMedia PoC Video Decoder and 24V DC 200mA Power Transformer.
3. Mounting Screws and RCA Video Cable.

This general purpose surveillance camera utilizes a built-in NetMedia Power over Coax (PoC) Video Encoder and external PoC 
Video Decoder to exchange power and video across a single coax cable, such as RG6. There is no need to run multiple cables to 
the camera location! It mounts to walls or ceilings and is viewed with a security monitor or television. To view the camera on a 
single standard television, use the TV’s composite RCA Video Input jack.

Camera Lens: 

 

Image Sensor: 
Resolution: 
Field of View:
Min Illumination:
Infrared Sensitivity:
Camera/Decoder Cable Connector:     

 

Camera/Decoder Cable Type:
Camera/Decoder Cable Distance Range:
Camera/Decoder Video Signal:
PoC Decoder Video Output:
PoC Decoder Video Output Connector:
PoC Decoder Power Input:
PoC Decoder Power Connector: 
PoC Decoder Size:
PoC Decoder Weight:
Assembly Size:   
Mounting Holes: 
Assembly Weight:

Female F-Connector

Coax: RG6 quad shield recommended

Up to 100’

Proprietary

Composite

Female RCA

  24V DC, 200mA

5.5mm OD, 2.1mm ID, center positive

3.2” long, 2.2” wide, 0.9” thick

3 oz.

3.5” dia. x 3.25” high

2.25” centers

6.5 oz.

(subject to change without notice)

3.6mm

1/3” CCD

350 lines

72˚ Horizontal

0.7 Lux F2.0

Yes

3.7mm

1/4” CCD

470 lines

54˚ Horizontal

0.5 Lux F1.2

No

3.6mm

1/3” CCD

470 lines

72˚ Horizontal

0.3 Lux F1.2

Yes

PoC Video Encoder

Built into camera - exchanges 

power and video with Decoder for 

One Wire Video™ on coax cable.

Camera Lens

Factory set - rotate in either 

direction to adjust focus.

SPECIFICATIONS

B/W

Color

    Day/Night Color

Содержание NM-POCDOME

Страница 1: ...tMedia PoC Video Decoder and 24V DC 200mA Power Transformer 3 Mounting Screws and RCA Video Cable This general purpose surveillance camera utilizes a built in NetMedia Power over Coax PoC Video Encoder and external PoC Video Decoder to exchange power and video across a single coax cable such as RG6 There is no need to run multiple cables to the camera location It mounts to walls or ceilings and is...

Страница 2: ...e viewing device monitor Quad DVR modulator etc to the Decoder s RCA Video Out jack Simple adapters such as RCA to BNC may be used where appropriate 3 Connect the 24V DC 200mA Power Transformer from an AC outlet to the Decoder s Power Input Connector 4 Remove Camera Dome and mount the Camera Base to ceiling Adjust the Camera Bracket for proper viewing Replace the Camera Dome and rotate opening to ...

Страница 3: ...edia may void your authority granted by the FCC to use the product Failure to follow all installation instructions could void your FCC authorization to use the product in the USA Security Cameras FCC compliance requires that the Camera Dome and Decoder module end plates be fastened whenever the unit is in opera tion NOTE This equipment has been tested and found to comply with the limits for a clas...

Страница 4: ...reas will be overexposed In addition cameras that are designed for low light or infrared sensitivity typically favor the shadow areas and look more washed out under bright conditions Try adjusting the image field so that more light areas are visible and see if the iris closes to improve the picture It is normal though that as the lighting conditions change throughout the day so will the camera iri...

Отзывы: