NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com
Q- Automatic switching is great but how can I manually change the input?
A- Press the Select Button to manually change inputs; the unit will still
automatically switch to new inputs when detected.
Q- Is there a way to reset the switch?
A- You can reset the switch by holding the Select Button while applying power.
Q- What do the different Input LED conditions indicate?
A- The LED’s indicate various conditions as described here:
OFF
means there is no powered up input connected.
ON
solid means there is a powered up input connected but it is not
selected.
SLOW PULSING
means there is a powered up input connected and it is
selected.
FAST PULSING
means there is no powered up input connected but it has
been manually selected; select a different input.
ALL FLASHING
rapidly means that the output cable is not properly
connected to the display device; reconnect it or change cables.
Q- What if I have more than 4 HDMI devices?
A- You can connect multiple iHDMI-4x1’s together to make a 7x1 (two units), a
10x1 (three units), a 13x1 (four units), a 16x1 (five units), or even larger
intelligent arrays.
Frequently Asked Questions
MAN-iHDMI-4x1-CE REV1003A
NM-iHDMI-4x1-CE
