B. Via PoE Power Injector
Typical Application and hardware connection as follows:
PoE Power Injector
Power Adapter
Internet
Main Router
1) Connect your main router to the
LAN/WAN
port on the PoE Power Injector with an
Ethernet Cable.
2) Connect the
LAN2
port of netis Access Point to the
PoE
port on the PoE Power Injector
with an Ethernet Cable.
3) Plug the Provided Power Adapter into the
DC-IN
jack on the PoE Power Injector and
the other end to a stand electrical wall socket.
4) Then go to “
4. Network Configuration
”, to configure WF2222.
netis Wireless N Ceiling-Mounted Access Point
Quick Installation Guide
4
