Netis ST3208, Руководство пользователя

Страница: 18 / 42

18
Notes:
After modifying the password with immediate effect, the parameters will not be lost though is
powered off.
4.2.3 Port Setting
Figure 4-2-4
On this page, you can configure the basic parameter for the ports .When the port is disabled, the
packers on the port will be discard. Shut down the port which is vacant for a long time can
reduce the power consumption effectively. And you can enable the port when it is in need. The
parameters will affect the working mode of the ports, please set the parameters appropriate.
Status: Allows you to Enable/Disable the port .When Enable is set, the port can forward the
packets normally.
Speed and Duplex: Select the speed and Duplex mode for the port .The device connected to the
switch should be in the same Speed and Duplex mode with the switch .When “Auto” is set, the
Speed and Duplex mode will be determined by auto-negotiation. But the SFP port, this Switch
does not support auto-negotiation.
Flow Control: Allows you to Enable /Disable the Flow Control feature .When Flow Control is
enabled, the switch can synchronize the speed with its peer to avoid the congestion.
4.3 Configuration
4.3.1 Link Aggregation
Link Aggregation is to combine a number of ports together to make a single high-bandwidth data