2
Minimum system requirements (for configuration)
A device with an Internet browser (Firefox, Chrome, Safari, Microsoft Internet
Explorer, Opera, Mozilla etc.) that has JavaScript and Cookies support enabled.
Package contents
NETIO PowerCable device
Quick Installation Guide (QIG)
Device description
1) Status LED (Y+R)
2) Output state LED (G)
3) Button – to press, a thin object is needed (may be conductive)
4) Type plate – indicates the device model, electrical rating, maximum
switching power and serial number
5) Caution: Do not open the device – risk of electric shock!
Rear view
Status
LED (1)
Yellow
Off
No WiFi connection
On
WiFi connected
Quickly flashing
& red is off
AP mode
Slowly flashing
& red is off
Waiting for DHCP
3 fast flashes every
second & red is off
Locate function – for one minute after being
enabled in the web administration
Red
Flash
Activity (command received over M2M)
Output
LED (2)
Green
Off
Output relay open
On
Output relay closed
Quickly flashing for 1sec
“Load to defaults & AP mode” activated
All
LEDs
Yellow
+ red,
green
Shortly on
During system boot (e.g. after powering up
or rebooting the device)
Front view
1
2
3
5
4
3
Button functions
Output control
To change the output state, press the button three times within 1 to 5
seconds.
AP mode activation
Press and hold the button for at least 10 seconds while the device is
on. This activates the AP mode. You can now connect to the device
and change the WiFi network to which it should connect.
(Yellow LED blinks guickly)
Restoring factory
defaults
Switch Off the device. Press and hold the button for at least 10
seconds
while powering up
the device. The device reverts to factory
settings and the AP mode is activated. (Green quickly flashing for
1sec, than Yellow blinks quickly)
First connection, starting up and basic configuration
1) Connect the NETIO PowerCable plug into an electrical socket. When the device
is powered up for the first time, it enters the “
AP mode
” (Yellow flashing quickly).
2) On a computer, tablet or smartphone, display available WiFi networks and
connect to the unsecured “
PowerCable-AP-xx
” network. (Figure 1)
3) Open a web browser and enter
10.0.42.1
– you will see NETIO PowerCable WiFi
configuration page. (Figure 2)
Alternatively, enter any URL, you will be redirected, for example
www.netio.eu
.
Figure 1
Figure 2
