8 / 18
www.netio-products.com
5. While the search is in progress, press the button on the PowerCable IQRF
6. After a successful bonding, a message about the bonding result appears and the yellow LED
lights up on the PowerCable IQRF.
Unbonding from the IQRF network
The device can be unbonded in two ways:
1.
By the Coordinator
– use the “Unbond Node” function with the selected PowerCable
address, and confirm the unbonding at the remote device, too.
2.
By the PowerCable IQRF
– unplug the PowerCable IQRF. Press and hold the bonding button
(Reset icon) and plug the device back in. Hold the button pressed until the green LED (Output
icon) lights up, then release immediately. Successful unbonding is indicated by flashing yellow
LED (WiFi icon) = Unbonded status.
