Netgenium AUG3201-IP Скачать руководство пользователя страница 5

Страница: 5 / 32

genium

Net

AUG3201-IP Config Guide

© Copyright Netgenium Systems 2017

Page 5

DNS Settings

Domain Name.

Not used.

Primary DNS.

Not used.

Secondary DNS.

Not used.

Time & Date

Navigate to: Setup>Time & Date

This page enables you to set the system time and date.

The options are:

Set to Computer Time:

This option sets the time and date to that of your

computer when the

Apply

button is clicked.

Set Manually:

Enter the time and date in the textboxes

provided and click the Apply button.

Use NTP:

With this option enabled the controller will

synchronize its time and date with an NTP

server every 5 minutes.

Enter the IP Address of the NTP server and click

the

Apply

button.

If the controller is configured to register with PolicyServer the unit will

automatically be synchronised with PolicyServer’s date and time.

The system time has no significance at all to the operation of the unit.

its only function is to provide a time stamp to any log entries.

Содержание AUG3201-IP

































Результаты поиска

Содержание AUG3201-IP

Отзывы:

Бренды по названию

Популярные бренды

Netgenium AUG3201-IP, Руководство по настройке

Результаты поиска

Содержание AUG3201-IP

Отзывы:

Бренды по названию

Популярные бренды