7. Confirm the Destination Folder and User Information and select Install.
8. The following screen shows that the program is installing the encryption utility on
your computer.
9. On the back of each XE102 is a
Device Password PWD: aaaa-xxxx-
yyyy-zzzz. For each Netgear Powerline
device that you are installing on your
network, write this number down.
EXAMPLE:
Device Location: Bedroom
PWD: MX96-DHEE-U9Y3-BXJB
4. Choose the default location (select Next) or select Change to change the location where files
will be saved on your hard drive.
5. If you chose to “Change” the location you will get the following screen: Type a new folder
name or select another location using the folder options.
6. Click
OK.
9
8
MX96-DHEE-U9Y3-BXJB
