NETGEAR XAV2501 - Powerline AV Ethernet Adapter Скачать руководство пользователя страница 26

28

   

|    

Appendix B.  Notification of Compliance 

 

Powerline AV+ 200 Adapter Kit XAVB1501 

FCC Declaration Of Conformity

We, NETGEAR, Inc., 350 East Plumeria Drive, San Jose, CA 95134, declare under our sole 
responsibility that the XAV2501 Powerline AV+ 200 Adapter complies with Part 15 of FCC 
Rules. Operation is subject to the following two conditions:

•     

This device may not cause harmful interference, and

•     

This device must accept any interference received, including interference that may cause 

undesired operation.

FCC Radio Frequency Interference Warnings & Instructions

This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a residential installation. This 
equipment uses and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following methods:

•     

Reorient or relocate the receiving antenna.

•     

Increase the separation between the equipment and the receiver.

•     

Connect the equipment into an electrical outlet on a circuit different from that which the 

radio receiver is connected.

•     

Consult the dealer or an experienced radio/TV technician for help.

Modifications made to the product, unless expressly approved by NETGEAR, Inc., could void 
the user's right to operate the equipment.

Canadian Department of Communications Radio Interference Regulations

This digital apparatus, the XAV2501 Powerline AV+ 200 Adapter, does not exceed the Class 
B limits for radio-noise emissions from digital apparatus as set out in the Radio Interference 
Regulations of the Canadian Department of Communications.

European Union

The XAV2501 Powerline AV+ 200 Adapter complies with essential requirements of EU EMC 
Directive 2004/108/EC and Low Voltage Directive 2006/95/EC as supported by applying the 
following test methods and standards:

•     

EN55022: 2006 / A1: 2007

•     

EN55024: 1998 / A1: 2001 / A2: 2003

•     

EN60950-1: 2006 2nd Edition

•     

EN 61000-3-2:2006

•     

EN 61000-3-3:1995 w/A1: 2001+A2: 2005

Содержание XAV2501 - Powerline AV Ethernet Adapter



























Отзывы: