NETGEAR WNHDB3004, Руководство пользователя

Страница: 57 / 64

3DHD Home Theater Adapter WNHD3004 User Manual
Technical Specifications A-3
v1.0, November 2010
Restoring the Default User Name and Password
You can restore the factory default configuration settings to reset the home theater adapter’s user
name to
admin, the password to password, and the IP address to 192.168.1.240 (for AP mode) or
192.168.1.241 (for Bridge mode). This procedure erases your current configuration, including
your wireless security settings, and restores the factory defaults. When you log in after resetting,
the Smart Wizard configuration assistant prompts you to configure these settings.
To restore the factory default configuration settings:
1. Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings
button, located on the rear panel of the home theater adapter, for about 6 seconds.
2. Release the restore factory settings button, and wait for the home theater adapter to reboot.
The factory default settings are restored so that you can access the home theater adapter from
your Web browser using the factory defaults.