Support
Thank you for purchasing this NETGEAR product. You can visit
www.netgear.com/support
to register your product, get help, access the latest
downloads and user manuals, and join our community. We recommend that you
use only official NETGEAR support resources.
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en
français canadien à
http://downloadcenter.netgear.com/other/
.
(If this product is sold in Canada, you can access this document in Canadian
French at
http://downloadcenter.netgear.com/other/
.)
For the current EU Declaration of Conformity, visit
http://kb.netgear.com/11621
.
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/
.
See the regulatory compliance document before connecting the power supply.
December 2017
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non-NETGEAR
trademarks are used for reference purposes only.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
NETGEAR INTL LTD
Building 3, University Technology Centre
Curraheen Road, Cork, Ireland
Discover the Access Point
¾
To discover and configure the access point using a wireless controller:
1. Open a web browser, and in the browser’s address field, type the wireless
controller’s IP address.
2. Log in to the wireless controller.
The wireless controller’s local browser–based management interface page
displays.
3. Select
Access Point > Discovery Wizard
.
4. Follow the onscreen steps to discover the access point and review the
discovery results.
5. Add the access points that you want to be managed by the wireless controller
to the Managed AP List.
6. Make sure that the country is set to the location where the device is
operating.
You must comply with the local, regional, and national regulations set for
channels, power levels, and frequency ranges.
For more information about the Discovery Wizard and the managed AP list, see
the wireless controller user manual. To view or download the user manual, visit
downloads.netgear.com/files/GDC/WC7500/WC_AllModels_UM.pdf
.
Verify Connectivity
From a computer or mobile device, verify that you can connect to the WiFi
network of the access point. You can also check the access point LEDs to verify a
successful installation and connection.
LED
Description
Power
• Solid amber
. The access point is booting.
• Slow blinking amber
. The access point is not managed by a
wireless controller.
• Green
. The access point booted and is managed by a wireless
controller.
Activity
• Blinking green
. Network traffic through the access point.
• Off
. No network traffic through the access point is detected.
WiFi On/Off
• Solid green
. The access point’s WiFi is active.
• Off
. The access point’s WiFi is off.