Get Started
13
N300 WiFi Range
Extender
Repeat this step for all of your computers and WiFi devices.
11.
Click the
CONTINUE
button.
A message displays confirming that the extender is connected to the new extended WiFi
network.
12.
Click the
NEXT
button.
The registration screen displays.
13.
Complete the registration fields and click the
FINISH
button to complete the setup.
If you do not want to register your extender, click the
Skip Registration
link. Note that
you must register your extender before you can use NETGEAR telephone support.
The Status screen displays.
14.
Unplug the extender and move it to a new location closer to the area with a poor WiFi signal.
The location that you choose must be within the range of your existing WiFi router network.
15.
Plug the extender into an electrical outlet.
Wait for the Power LED to light amber and then turn green. If the Power LED does not
light, slide the
Device On/Off
switch to the
On
position.
16.
Use the Router Link LED to help you choose a spot where the extender-to-router connection
is optimal.
The extender connects to your existing router’s WiFi network.
Find the Best Location
If the WiFi signal is weak, the first time you join the extender network, an arrow LED blinks for
two minutes. If this happens, adjust the position of the extender.
•
If the Router Arrow LED
blinks, move the extender closer to the router.
•
If the Client Arrow LED
blinks, move the computer or WiFi device closer to the
extender.
If no arrow LEDs are lit, the extender is in a good location.
