January 30, 2007
This symbol was placed in accordance with the European Union Directive
2002/96 on the Waste Electrical and Electronic Equipment (the WEEE
Directive). If disposed of within the European Union, this product should be
treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.
© 2007 by NETGEAR, Inc. All rights reserved. NETGEAR is a registered trademark of NETGEAR, Inc. in the
United States and/or other countries. Other brand and product names are trademarks or registered trademarks of
their respective holders. Information is subject to change without notice.
Placing the USB Adapter Cradle
You can attach the WG111T 108 Mbps Wireless USB 2.0 Adapter directly to a USB port
on your computer, or use the USB cable to extend the range and obtain better wireless
reception.
Follow these instructions to use the USB cable, plastic cradle, and loop and hook fastener
provided in the package for better USB Adapter placement on a notebook computer:
1.
The WG111T 108 Mbps Wireless USB 2.0 Adapter comes with three black fasteners.
Locate the one that has a prickly side and attach it to the plastic cradle on the middle
of the outside rear.
2.
Insert the WG111T 108 Mbps Wireless
USB 2.0 Adapter in the plastic cradle.
3.
Place one of the other pieces of loop
and hook fastener on the back of your
notebook monitor near the top for
better reception.
Note: The last piece fastener can be
placed on the side of your PC monitor
nearest your wireless access point, if
you are using the USB Adapter with a
desktop PC.
4.
Join the pieces of the fastener to attach
the USB Adapter in the plastic cradle
to the notebook or desktop monitor.
See the installation instructions for your
operating system before attaching the USB
cable to the USB Adapter and your computer.
Technical Support
After completing the Smart Wizard configuration assistant, locate the serial number on the
bottom label of your product and use it to register your product at
http://www.NETGEAR.com/register
.
Registration on the website or over the phone is required before you can use our telephone
support service. The phone numbers for worldwide regional customer support centers are
on the Warranty and Support Information card that came with your product.
Go to
http://kbserver.netgear.com
for product updates and Web support.
