September 2017
NETGEAR INTL LTD
Building 3, University Technology Centre
Curraheen Road, Cork, Ireland
© NETGEAR, Inc., NETGEAR, and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non‑NETGEAR
trademarks are used for reference purposes only.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
Wall Installation
¾
To mount the access point to a wall:
1. Place the plastic
bracket on the wall
where you want to
mount the access
point.
2. Mark the wall where
the four outer
mounting holes are.
3. Using the wall anchors
and tall screws, attach
the mounting bracket
to the wall.
4. Align the two
rectangular holes in
the bottom of the
access point with the
protruding hooks on
the plastic bracket.
Support
Thank you for purchasing this NETGEAR product. You can visit
to register your product, get help, access the latest
downloads and user manuals, and join our community. We recommend that you
use only official NETGEAR support resources.
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en
français canadien à
http://downloadcenter.netgear.com/other/
.
(If this product is sold in Canada, you can access this document in Canadian
French at
http://downloadcenter.netgear.com/other/
.)
For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/
.
See the regulatory compliance document before connecting the power supply.
5. Push the hooks into the
holes and turn the access
point to secure it onto the
plastic bracket.
Desk Installation
For desk installation, attach the four round rubber feet to the locations
marked by the gray circles on the bottom of the access point.
