Support
Thank you for purchasing this NETGEAR product. You can visit
to register your product, get help, access the latest
downloads and user manuals, and join our community. We recommend that you use
only official NETGEAR support resources.
Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français
canadien à
http://downloadcenter.netgear.com/other/
(If this product is sold in Canada, you can access this document in Canadian French at
http://downloadcenter.netgear.com/other/.
)
For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/
For regulatory compliance information, visit
http://www.netgear.com/about/regulatory/
.
See the regulatory compliance document before connecting the power supply.
Access the Base Station Camera Feeds
1. Connect your computer or mobile device to the same LAN as the base station.
If you are unable to connect to the same LAN using WiFi, use an Ethernet cable
to connect a computer to the same router or switch as the base station.
2. Do one of the following:
• Windows-based computer
. Open a folder and then click
Network
or
Network Places
. Look for a
FlexPowerBS-xxx
icon. It might appear in the
other devices category.
• Mac, Linux, or mobile device
. Open a web browser and enter
http://FlexPowerBS-xxx/
(replace xxx with the last 3 digits of the base
station serial number). The serial number is on the base station label.
• IP address
. Use your router’s admin web interface or a network scan tool to
look up the IP address for the base station and then type the IP address into
your browser address bar.
3. Enter the password.
The default password is
password
. The base station web page displays the
cameras that are linked to the base station.
4. To test the camera feed, tap or click the
Snapshot
button to refresh the camera
image for each camera.
Add Your Camera to an ONVIF-Compliant VMS
Note:
We recommend that the camera and the VMS hardware are on the same LAN
and subnet.
1. Log in to the base station.
The base station web page displays.
2. Tap or click the gear icon near the camera.
3. Note the IP address next to Network.
4. Open your VMS software.
5. Follow the instructions provided by your VMS vendor to discover an ONVIF
camera.
If the automatic discovery process does not work, you might need this
information to manually add the camera to your VMS:
• IP address found in Step 3
.
• Port
. HTTP: 80, RTSP:554
• The camera’s login credentials
. The camera user name is
admin
and the
default password is
password
. (The camera password might be different
from the base station’s admin password.)
6. Select
ONVIF
or
Generic ONVIF
as the device type.
7. For best performance, select
h.264
for video.
After you add the camera to the VMS, you can select one of three default
streaming profiles or create your own custom profile.
8. Adjust the bitrate as needed for your network environment.
Reduce the bitrate in environments with high 2.4 Ghz interference or if the
camera must be placed far away from the nearest base station.
9. Select no more than 24 frames per second as the frame rate.
Note:
For information about wall-mounting the camera indoors or outdoors, see the
Wall-Mounting the FlexPower Camera
guide that came with your camera.
Charge the Camera Battery
The rechargeable battery is fully charged when it leaves the factory.
1. Place the camera indoors.
If you are using the camera outdoors, bring it inside while charging the battery.
2. Connect the power adapter cable to the camera power adapter.
You must use the power adapter and cable that came with the camera.
3. Connect the other end of the adapter cable to the camera.
4. Plug the power adapter into an electrical outlet.
The camera LED lights solid blue when the camera battery is fully charged.
