NETGEAR RT338, Руководство по установке

Страница: 4 / 13

Model RT338 ISDN Router Installation Guide
Refer to the following illustration and steps when connecting the router.
To connect your router:
1. Connect your PC or hub to the LAN port:
• Use the red crossover cable included to connect the router directly to a
PC.
• Use the white straight-through cable included to connect the router to a
10 Mbps or 100 Mbps hub or switch port. The router will sense the
speed of the connected port and will automatically set its speed to
match.
2. Connect the analog devices to the phone ports (Phone 1 and Phone 2,
respectively).
3. Connect the ISDN line from the router to the ISDN wall connection.
Use the black cable that is provided.
4. Connect a network manager workstation to the RS-232 port. This step
is optional.
5. Connect the DC power adapter cable to the power outlet on the rear
panel of the switch and plug the power adapter into the wall outlet.
Note: If you are using a 100 Mbps Fast Ethernet network or a mixed
10 Mbps/100 Mbps network, use Category 5 cabling (included).
Installing the Hardware
POWER
12VDC
LAN
MANAGER
ISDN
PHONE 1 PHONE 2
Installing the Model RT338 Router
9536FA
PCs
or hubs
Phone or other
analog devices
Phone or other
analog devices Network
manager
(optional)
ISDN wall
connection
AC power
adapter