Configure the Computer to Work with
the Router and Restart the Network
Next, you make sure that the computer can interact with the router. To do this, you configure
the TCP/IP settings on the computer and then restart the network. How you do this depends
on your computer.
Windows Operating System
Normally, you leave the TCP/IP setup parameters at their factory default settings unless you
have a specific reason to change them. You should verify that the computer is set to ‘obtain an
IP address automatically’ in the
Network
control panel.
Windows 98 or Me
1.
Choose
Settings>Control Panel
from the
Start
menu.
2.
Double-click the
Network
icon.
3.
Click the
Configuration
tab.
4.
In the list of installed network
components, select the TCP/IP
entry for the computer’s
Ethernet adapter or NIC.
5.
Click
Properties
.
6.
Click the
IP Address
tab.
7.
If not selected, select
Obtain an
IP address automatically.
8.
Click the
Gateway
tab.
9.
Select and remove any IP Gateway
addresses that are listed.
10. Click
OK
and click
OK
again to.
close the
Network
control panel.
11. Go to
Restarting the Network
on the
next page.
6
3
3
Windows 98/Me
Windows 2000 or XP
1.
Right-click
My Network Place
and
choose
Properties
.
2.
Double-click
Local Area Network
Connection
and click
Properties.
3.
Select
Internet Protocol (TCP/IP)
and
click
Properties
.
4.
Select
Obtain IP address automatically
and
Obtain DNS server address
automatically.
5.
Click
OK
twice and click
Close.
6.
Go to
Restarting the Network
.
Содержание RP614 - Web Safe Router
Страница 1: ......
