NETGEAR ReadyNAS 104
19
ReadyNAS OS 6 Desktop Storage Systems
Status Information
You can obtain information about the status of your storage system by reviewing the
indicators listed in the following table.
Table 2. ReadyNAS 104 indicator descriptions
Indicator
Description
Power button and LED
Press this button to turn on the ReadyNAS. The LED has these states:
•
Blinking
. Booting or shutting down
•
On
. Powered on
•
Off
. Powered off
Disk LEDs (1, 2, 3, 4)
Each disk bay has an LED associated with it, in numerical order from left to right,
along the top of the front panel of the storage system. The disk LEDs have these
states:
•
On
. Power is on and the disk is operating normally.
•
Blinking
. The disk was removed, failed, or is resynchronizing. See the
display screen for details.
•
Off
. The disk bay is empty.
Disk activity LED
The disk activity LED has these states:
•
On
. At least one disk is present.
•
Binking
. A disk is active.
•
Off
. No disks are present.
Rear panel Ethernet port
LEDs
Two LED status indicators are built into this port, one green and one amber.
They indicate port speed and activity as follows:
•
Green on, amber off
. 1000 Mbps connection speed, no activity
•
Green blinking, amber off
. 1000 Mbps connection speed, activity
•
Green off, amber on
. 10 Mbps or 100 Mbps connection speed, no activity
•
Green off, amber blinking
. 10 Mbps or 100 Mbps connection speed, activity
•
Green off, amber off
. No connection.
Status display screen
Display messages about the status of your storage system. Note that the status
display screen goes to sleep to prevent burn-in; to wake it, press the
Power
button. If the storage system reports an abnormal operation or error, the status
display screen stays on.
