NETGEAR RangeMax NEXT WNR834A, Справочное руководство

Страница: 29 / 106

RangeMax NEXT Wireless Router WNR834A Reference Manual
Connecting the Router to the Internet 3-3
v1.0, April 2006
Verify wireless connectivity. Connect to the Internet or log in to the wireless router from a
computer with a wireless adapter. For wireless connectivity problems, see
“Troubleshooting
Tips” on page 3-3 .
You are now wirelessly connected to the Internet! Implement wireless security according to the
instructions in
“Implementing Appropriate Wireless Security” on page 4-2 .
Troubleshooting Tips
Here are some tips for correcting simple problems you may have:
Be sure to restart your network in this sequence:
1) Turn off the modem, wireless router, and computer; 2) Turn on the modem, wait two
minutes; 3) Turn on the wireless router and wait 1 minute; 4) Turn on the computer.
Make sure the Ethernet cables are securely plugged in.
• The Internet status light on the wireless router will be lit if the Ethernet cable to the wireless
router from the modem is plugged in securely and the modem and wireless router are turned
on.
• For each powered on computer connected to the wireless router with a securely plugged in
Ethernet cable, the corresponding wireless router LAN port status light will be lit. The label on
the bottom of the wireless router identifies the number of each LAN port.
Make sure the wireless settings in the computer and router match exactly.
The Wireless Network Name (SSID) and WEP or WPA security settings of the router and
wireless computer must match exactly.
Make sure the network settings of the computer are correct.
• LAN and wirelessly connected computers must be configured to obtain an IP address
automatically via DHCP. Please see “Preparing a Computer for Network Access” in
Appendix B or the animated tutorials on the CD for help with this .
• Some cable modem ISPs require you to use the MAC address of the computer registered on
the account. If so, in the Router MAC Address section of the Basic Settings menu, select
Use
this Computer’s MAC Address . The router will then capture and use the MAC address of the
computer that you are now using. You must be using the computer that is registered with the
ISP. Click
Apply to save your settings. Restart the network in the correct sequence.