manualshive.com logo in svg

NETGEAR R6400, Руководство пользователя

Поделиться
Скачать
NETGEAR R6400 Скачать руководство пользователя страница 92

Access the Router’s USB Drive Through the Internet 

92

AC1750

 Smart WiFi Router 

7. 

Select the 

ReadyCLOUD 

radio button.

8. 

Enter your ReadyCLOUD user name and password and click the 

Register

 button.

If you did not create a ReadyCLOUD account, see 

Create a ReadyCLOUD Account 

on 

page

 

90.

Note:

If the router’s Internet connection mode is set to Dial on Demand, the 
router automatically changes the connection mode to Always On. This 
change is required for ReadyCLOUD to remotely access the USB 
storage device.

The router is registered with ReadyCLOUD.

9. 

After registration, visit 

http://readycloud.netgear.com

.

10. 

Click the 

Sign In

 link, enter your ReadyCLOUD user name and password, and click the 

Sign In

 button. 

The ReadyCLOUD page displays the router that you registered and the contents of the 
USB storage device that is connected to the router.

Содержание R6400





















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды