NETGEAR PTVU1000 Скачать руководство пользователя страница 6

Страница: 6 / 80

Setup and System Initialization

This chapter describes the following topics:

• Minimum System Requirements

• What’s in the Package

• Software Installation

• Setting Up the Adapter

• Positioning the PC Adapter

• Positioning the HD Base

• Icon Descriptions

• LED Descriptions

• Universal Push2TV HD Manager

• Configuring the Display

• Supported Resolutions

• The Universal Push2TV HD TV Adapter Does Not Turn On

• The Universal Push2TV HD TV Adapter Shows a “Ready to Connect” Message

• Driver Information

Minimum System Requirements

Note:

These minimum requirements are for streaming a high-resolution

movie on a high-resolution screen. Movie and screen resolutions
can be lower than 1080p when you do not require as much
resolution.

For best performance, NETGEAR recommends the following minimum system requirements:

•

Laptop or PC with USB 2.0 port available.

•

Microsoft Windows XP SP3 (32 bit), or Microsoft Windows Vista SP2 (32 or 64 bit), or

Win7 (32 or 64 bit).

•

HDTV, display, or projector with HDMI port.

Содержание PTVU1000

















































































Результаты поиска

Содержание PTVU1000

Отзывы:

NETGEAR PTVU1000, Руководство пользователя, Страница: 6 / 80

Результаты поиска

Содержание PTVU1000

Отзывы: