Bridging and repeating with WNDAP330
This document describes the different options to setup Bridging and Repeating (WDS – Wireless
Distribution System) with two or more WNDAP330.
The Bridging and Repeating concepts described are valid for all the other Netgear products
supporting WDS with new firmware (from May 2009).
Bridging and Repeating can be used in either 2.4 GHz or 5 GHz bands alternatively.
Table of Contents
Introduction – WDS
.......................................................................................................... 2
Setup minimum requirements: SSID, Radio Channel, Encryption
........................... 2
Wireless Repeating
.......................................................................................................... 3
Wireless Point-to-Point Bridge
....................................................................................... 6
Wireless Point to Multi-Point Bridge
.............................................................................. 8
Final Notes
...................................................................................................................... 11
