NETGEAR ProSafe WNAP320, Справочное руководство

Страница: 87 / 93

Appendix A. Supplemental Information | 55
ProSafe Wireless-N Access Point WNAP320 Reference Manual
Factory Default Settings
You can use the restore settings button located on the rear of your device to reset all settings
to their factory defaults. This is called a hard reset.
•
To perform a hard reset, push and hold the restore settings button for approximately 5
seconds (until the Test LED blinks rapidly). Your device will return to the factory
configuration settings shown in
Table 3
.
•
Pressing the restoresettings button for a shorter period of time simply causes your device
to reboot.
Table 3. Access Point Default Configuration Settings
Feature Description
AP Login
User Login URL 192.168.0.100
User Name (case-sensitive) admin
Login Password (case-sensitive) password
Ethernet Connection
Static IP Address 192.168.0.210
Ethernet MAC Address See bottom label.
Port Speed 10/100/1000
Local Network (LAN)
Lan IP 192.168.0.100
Subnet Mask 255.255.255.0
Gateway Address 0.0.0.0
DHCP Server Disabled
DHCP Client Disabled
Time Zone USA-Pacific
Time Zone Adjusted for Daylight Saving
Time Disabled
SNMP Enabled, but trap forwarding disabled
Spanning Tree Protocol Disabled
Secure Telnet Enabled
Wireless