July 2011
This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union,
this product should be treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.
©2011 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of
NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or
registered trademarks of their respective holders. Information is subject to change without notice.
Specifications
Technical Specifications
Standards compatibility
IEEE 802.3i 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX
Fast Ethernet, IEEE 802.3x Flow Control, IEEE 802.1p and
TOS priority, WRR queuing with two queues
Network interface
RJ-45 connector for 10BASE-T or 100BASE-TX
Power Consumption
5.9W max
AC POwer
100-240VAC 50-60Hz, 1.2A max.
Weight
1.43 Kg (3.15 lbs)
Dimensions
(W x D x H)
330 mm x 173 mm x 43 mm
13 in x 6.8 in x 1.7 in
Operating temperature
0 to 50° C (32 to 122° F)
Operating humidity
10% t0 90% relative humidity, non-condensing
Electromagnetic
compliance
CE Class A, included EN55022 (CISPR 22) and EN55024,
FCC part 15 Class A, VCCI Class A, C-Tick Class A, CCC
Safety agency
approvals
CE mark, Commercial UL listed (UL 60950-1), C-Tick, CCC,
CB
Performance Specifications
Frame filter rate
14,880 frames/sec max for 10M port; 148,800 frames/sec max
for 100M;
Frame forward rate
14,880 frames/sec max for 10M port; 148,800 frames/sec max
for 100M;
Network latency
(using 64-byte packets)
100 Mbps to 100 Mbps: 10
μ
s max
Address database size
up to 8K MAC addresses
MAC Address Learning
Automatically updated
Queue buffer
1.25Mb
NETGEAR Green
features
• Auto power-down mode saves energy when ports are
unused
• Power-saving per port if the cable length is less than 32.8
feet (10 meters)
"Este equipamento opera em caráter
secundário, isto é, não tem direito a
proteção contra interferência prejudicial
mesmo de estações do mesmo tipo, e
não pode causar interferência a sistemas
operando em caráter primário."
Troubleshooting
Technical Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label of your product and
use it to register your product at
http://www.NETGEAR.com/register
. Registration is
required before you can use the telephone support service. Registration via our
website is strongly recommended.
Go to
http://support.netgear.com
for product updates and Web support
.
For
additional information about setting up, configuring, and using your 24-port
Unmanaged Plus Switch, see the
User Manual
.
For complete DoC please visit the NETGEAR EU Declarations of Conformity
website at:
http://support.netgear.com/app/answers/detail/a_id/11621/
Problem
Action
Power light is not lit
The switch has no power. Make sure that the power cord is
properly connected to the switch and to a functioning power outlet.
If it is in a power strip, make sure the power strip is turned on. If the
socket is controlled by a light switch, make sure the switch is in the
on position.
Port number light is
not lit for a connected
device, or stays on
continuously
There is a hardware connection problem.
• Make sure the cable connectors are securely plugged in at the
switch and the device.
• If the Ethernet cable is connected to a NIC or other Ethernet
adapter, make sure the card or adapter is installed correctly and
is working.
• Make sure the cable is less than 328 feet (100 meters).
JFS524E_IG_29June11.fm Page 2 Thursday, July 7, 2011 10:32 AM