July 2009
This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union,
this product should be treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.
© 2009 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks
of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or
registered trademarks of their respective holders. Information is subject to change without notice.
Specifications
Technical Specifications
Standards compatibility IEEE 802.3i 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX
Fast Ethernet, IEEE 802.3x Flow Control, IEEE 802.1p and TOS
priority, WRR queuing with two queues
Network interface
RJ-45 connector for 10BASE-T or 100BASE-TX
Power Adapter
12V @ 1.0A DC input
Power Consumption
5.46W max
Weight
0.81 Kg (1.79 lbs)
Dimensions
(W x D x H)
287 mm x 103 mm x 27 mm
11.3 in x 4.1 in x 1.1 in
Operating temperature 0 to 40° C (32 to 98° F)
Operating humidity
10% t0 90% relative humidity, non-condensing
Electromagnetic
compliance
CE Class A, included EN55022 (CISPR 22) and EN55024,
FCC part 15 Class A, VCCI Class A, C-Tick Class A
Power adapter safety
agency approvals
CE mark, Commercial UL listed (UL 60950-1), C-Tick, CB
Performance Specifications
Frame filter rate
14,880 frames/sec max for 10M port; 148,800 frames/sec max
for 100M;
Frame forward rate
14,880 frames/sec max for 10M port; 148,800 frames/sec max
for 100M;
Network latency
(using 64-byte packets)
100 Mbps to 100 Mbps: 10
μ
s max
Address database size up to 8K MAC addresses
MAC Address Learning Automatically updated
Queue buffer
1.25 Mb
NETGEAR Green
features
• Auto power-down mode saves energy when ports are unused
• Power-saving per port if the cable length is less than 32.8 feet
(10 meters)
Troubleshooting Tips
Problem
Action
Power light is not lit
The switch has no power. Make sure that:
• The power cord is properly connected to the switch.
• The power adapter is properly connected to a functioning power
outlet. If it is in a power strip, make sure the power strip is turned
on. If the socket is controlled by a light switch, make sure the
switch is in the on position.
• You are using the NETGEAR power adapter supplied with your
switch.
Port number light is
not lit for a connected
device, or stays on
continuously
There is a hardware connection problem.
• Make sure the cable connectors are securely plugged in at the
switch and the device.
• Make sure the connected device is turned on.
• If the Ethernet cable is connected to a NIC or other Ethernet
adapter, make sure the card or adapter is installed correctly and
is working.
• Make sure the cable is less than 328 feet (100 meters).
Technical Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label of your product and use
it to register your product at
http://www.NETGEAR.com/register
. Registration is required
before you can use our telephone support service. Registration via our website is strongly
recommended.
Go to
http://kbserver.netgear.com
for product updates and Web support
.
For Warranty and
Regional Customer Support information, see the
Resource CD
that came with your
product.
FS116E_IG_12Aug09.fm Page 2 Wednesday, August 12, 2009 10:13 AM