manualshive.com logo in svg

NETGEAR ProSAFE GS105Ev2, Руководство пользователя, Страница: 59 / 83

Поделиться
Скачать
NETGEAR ProSAFE GS105Ev2 Скачать руководство пользователя страница 59

Manage and Monitor the Switch 

59

 ProSAFE Gigabit Web Managed (Plus) Switches

•

10M Half

. The port is forced to function at 10 Mbps with half duplex.

•

10M Full

. The port is forced to function at 10 Mbps with full duplex.

•

100M Half

. The port is forced to function at 100 Mbps with half duplex.

•

100M Full

. The port is forced to function at 100 Mbps with full duplex.

8. 

To configure more ports, repeat 

Step 6

 and 

Step 7

.

9. 

Click the 

Apply

 button.

Your settings are saved.

Use the ProSAFE Plus Utility to Specify the Port Speed or Shut
Down a Port

To specify the port speed or shut down a port:

1. 

Connect your computer to the same network as the switch.

You can use a WiFi or wired network connection, or connect directly to a switch that is 
off-network using an Ethernet cable.

2. 

Double-click the 

ProSAFE Plus Utility

 icon.

The Switch Selection page displays a list of Web Managed (Plus) switches that it 
discovers on the local network.

3. 

Select the switch.

If you do not see the switch, click the 

REFRESH

 button.

4. 

Click the 

APPLY

 button.

You are asked to enter the password for the switch.

5. 

Enter the switch’s password in the 

password

 field.

The switch’s default password is 

password

.

Содержание ProSAFE GS105Ev2




















































































Отзывы:

Нет отзывов