Optimize Performance With Quality of Service
34
ProSAFE Gigabit Web Managed (Plus) Switches
7.
Click the
Apply
button.
Your settings are saved and the Storm Control Rate table displays.
The previous figure is an example. Your switch might provide more or less ports.
8.
Set the storm control rate by doing the following:
a.
Select one or more ports.
b.
In the
Storm Control Rate
menu, select the maximum rate.
You can set a rate from 512 Kbps to 512 Mbps. By default, no limit is set.
c.
Click the
Apply
button.
Your settings are saved.
9.
To set a different rate for one or more other ports, repeat
Use the ProSAFE Plus Utility to Set Up Broadcast Filtering
To set up broadcast filtering:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2.
Double-click the
ProSAFE Plus Utility
icon.
The Switch Selection page displays a list of Web Managed (Plus) switches that it
discovers on the local network.
3.
Select the switch.
If you do not see the switch, click the
REFRESH
button.
4.
Click the
APPLY
button.
You are asked to enter the password for the switch.