FR328S Cable/DSL ProSafe Firewall with Dial Back-Up
1-6
Introduction
These LEDs are green when lit, except for the TEST LED, which is amber.
The Firewall’s Rear Panel
The rear panel of the FR328S (
Figure 1-2
) contains the connections identified below.
Figure 1-2: FR328S Rear Panel
Viewed from left to right, the rear panel contains the following elements:
•
DB-9 serial port for modem connection
•
Factory Default Reset push button
•
Eight Local Ethernet RJ-45 ports for connecting the firewall to the local computers
•
Internet WAN Ethernet RJ-45 port for connecting the firewall to a cable or DSL modem
•
AC power adapter input
Table 1-1:
LED Descriptions
Label
Activity
Description
POWER
On
Power is supplied to the firewall.
TEST
On
Off
The system is initializing.
The system is ready and running.
MODEM
On/Blinking
The port detected a link with the Internet WAN connection or
Remote Access Server. Blinking indicates data transmission.
INTERNET
100
On/Blinking
The Internet port is operating at 100 Mbps.
LINK/ACT (Activity) On/Blinking
The port detected a link with the Internet WAN connection and is
operating at 10 Mbps. Blinking indicates data transmission.
LOCAL
100
On/Blinking
The Local port is operating at 100 Mbps.
LINK/ACT
(Link/Activity)
On/Blinking
The Local port has detected a link with a LAN connection and is
operating at 10 Mbps. Blinking indicates data transmission.
M O DEM
1 2 V DC O . 5 A
8
7
6
5
4
3
2
1
LO CA L
1 0 / 1 0 0 M
IN TER N ET
FR328S.book Page 6 Monday, September 9, 2002 4:01 PM
Содержание ProSafe FR328S
Страница 4: ...iv FR328S book Page iv Monday September 9 2002 4 01 PM...
Страница 10: ...x Contents FR328S book Page x Monday September 9 2002 4 01 PM...
Страница 12: ...xii FR328S book Page xii Monday September 9 2002 4 01 PM...
Страница 16: ...FR328S book Page xvi Monday September 9 2002 4 01 PM...