NETGEAR powerline 500 XAVB5622, Руководство по установке

Страница: 10 / 16

10
Troubleshooting Tips
Power LED is off. Make sure that power is supplied to the electrical
outlet, and that the Powerline devices are not plugged
into an extension cord, power strip, or surge protector.
Power LED is blinking
amber.
Power saving mode occurs when the Ethernet LED is
off. This can occur in the following circumstances:
•
The Ethernet cable is unplugged.
• The device connected through the Ethernet cable
is turned off.
• The adapter is idle for 10 minutes.
It returns to normal mode within two seconds
after the Ethernet link is up.
Pick A Plug LED is off. • If you have set network security, make sure
that all Power line devices are using the same
encryption key; see the online user manual for
details.
• Press the
Factory Reset
button on each device
for one second to return the Powerline adapter to
its factory default settings
.
Pick A Plug LED is
amber or red.
Move the Powerline device closer to the other
Powerline devices.