NETGEAR Orbi Pro WiFi 6 Mini router, Быстрый старт

Страница: 2 / 10

PRO
1
2
3
4
Wall-mount the Orbi Pro WiFi 6 Mini
1 2 3 4 5 7
6
Orbi Pro WiFi 6 Mini Router hardware overview
1 Bar LED
2
Sync button (also used for WPS connection)
3
WAN port that supports 1 Gigabit Ethernet. Use this port for your WAN (Internet)
connection.
4
LAN Ethernet ports 1–3
5 DC power connector
6
Power LED
7 Reset button
1 Bar LED
2
Sync button (also used for WPS connection)
3 LAN Ethernet ports 1–4
4
DC power connector
5 Power LED
6
Reset button
Orbi Pro WiFi 6 Mini Satellite hardware overview
Orbi Pro WiFi 6 Mini Router
(Model SXR30)
Ethernet cable
Power adapter
(varies by region)
Package contents
Screws
Wall anchors
Orbi Pro WiFi 6 Mini Satellite
(Model SXS30)
Note: Both devices are included in the SXK30, SXK30B3, SXK30B4, or
can be purchased separately
.
Wall-mount bracket
Note: Not included with the SXS30
1
2 3
4 6
5
Mark the wall where you want to insert the provided anchors and screws, which must be
2.5 in. (63 mm) apart. Insert the anchors and screws, leaving about 0.25 in. (6 mm) of each
screw protruding from the wall.
When the screws are placed correctly, the holes at the back of the mounting bracket fit over
the protruding screws, allowing you to slide the mounting bracket downward until the tops
of the slots are resting on the screws.
2.5 in. (63mm)
Router setup
When setup is complete, the WAN port
on the Orbi Pro WiFi 6 Mini router is
connected with an Ethernet cable to a
modem or gateway, and the router is
connected to power.
Orbi Pro WiFi 6 Mini
Quick Start
CAUTION: You can install the wall mount vertically on a wall only. Do not install the
wall mount horizontally or on the ceiling.