NETGEAR NMS100 - ProSafe Network Management Software, Справочное руководство

Страница: 27 / 69

Reference Manual for the ProSafe Network Management System NMS100
Data and Statistics 3-7
September 2004 202-10058-01
Access Parameters
1. Select the Access tab to set access parameters for
a Device, Link, or Network object. For a
description of access parameters, please see
Table 3-1 Object Properties Access tab.
2. To change an access parameter, first select the
parameter name in the Attrib table.
The selected parameter name is displayed in the
Name box and the current value is in the Value
pull-down control.
3. In the Value pull-down, select one of the pull-
down values or type in a new value.
• Note that the Value pull-down does not
necessarily show all possible values for the
attribute.
• When editing multiple objects, any access parameter that has a different value for different
objects is shown as #####. Changing these attributes will set the new value for all selected
objects.
The following table describes the access parameters available in the Object Properties Access tab
for Device, Link, and Network objects. Access parameters are not valid for Subnet and Goto
object types.
Table 3-1. Object Properties Access tab
Attribute Name Description
Read Access Mode The mode used for polling and SNMP Read operations. Select ICMP
(Ping) for non-SNMP devices. Select SNMP V1 for standard SNMP
devices. Select NONE (TCP Only) for devices that will only have TCP
services polled.
Read/Write Access Mode The mode used for SNMP Write operations. Select SNMP V1 for
standard SNMP devices. You can also force this mode to be used for
both Read and Write operations from your console (not polling
operations) by using the Read/Write button on the ProSafe NMS frame
button bar (third button from left).
Read Community The Community name used for SNMP V1/V2c operations when the
Read Access Mode is used.