Quick Start
Nighthawk
AC1900 WiFi VDSL/ADSL Modem Router
Model D7000v2
Connect the modem router DSL port to a DSL outlet.
If your package includes a DSL microfilter, install the DSL microfilter and connect it
to the modem router DSL port. You can connect a phone to the DSL microfilter.
Connect the power adapter to the modem router and press the
Power
button.
The Power LED
lights white.
Wait one or two minutes for the DSL LED
to light white.
If the DSL LED does not light, your DSL line might be a bonded pair line, which is
not compatible with the modem router.
Attach and tighten the antennas on the threaded antenna posts.
Position the antennas as shown.
Package Contents
Modem router
Antennas (3)
Ethernet cable
3. Plug In Your Modem Router
4. Connect to the Internet
You can either use an Ethernet cable or connect with WiFi to the modem router.
To connect with WiFi:
Make sure that the WiFi LED
on the modem router is lit. The WiFi
network name and password are on the modem router label.
Open the WiFi connection manager on your WiFi-enabled computer or
mobile device, find the modem router’s WiFi network name, and use the
modem router’s password to connect.
Launch a web browser. If the NETGEAR installation assistant does not display, visit
www.routerlogin.net
. If a login window displays, enter
admin
for the user name
and
password
for the password.
Follow the NETGEAR installation assistant steps to connect to the Internet.
If the modem router does not connect to the Internet, see the user manual,
available online at
support.netgear.com
, or visit
community.netgear.com
for help.
2. Attach the Antennas
Power adapter
(varies by region)
DSL microfiilter
(varies by region)
Phone cable
45°
45°
1. Find Your ISP Account Login Information
Find your Internet service provider (ISP) account login information, such as your ISP user name
and password. You might need this information to se tup your modem router. If you do not know
your ISP account login information, contact your ISP.
