NETGEAR Nighthawk X6 AC3000 R7850 Скачать руководство пользователя страница 12

Страница: 12 / 169

Table 1. LED descriptions

Description

LED

• Solid amber. The router is starting.

• Blinking amber. The firmware is upgrading, or the Reset button was pressed.

• Solid white. The router is ready.

• Blinking white. The router is not ready, the firmware is upgrading, or the Reset button

was pressed.

• Off. Power is not supplied to the router.

Power

• Solid white. The Internet connection is ready.

• Solid amber. The router detected an Ethernet cable connection to the modem.

• Off. No Ethernet cable is connected between the router and the modem.

Internet

• Solid white. The 2.4 GHz WiFi radio is operating.

• Blinking. The router is sending or receiving WiFi traffic.

• Off. The 2.4 GHz WiFi radio is off.

2.4 GHz WiFi

• Solid white. The 5 GHz-1 WiFi radio is operating.

• Blinking. The router is sending or receiving WiFi traffic.

• Off. The 5 GHz-1 WiFi radio is off.

5 GHz 1 WiFi

• Solid white. The 5 GHz-2 WiFi radio is operating.

• Blinking. The router is sending or receiving WiFi traffic.

• Off. The 5 GHz-2 WiFi radio is off.

5 GHz 2 WiFi

• Solid white. A USB device is connected and is ready.

• Blinking. A USB device is plugged in and is trying to connect.

• Off. No USB device is connected, or someone clicked the Safely Remove Hardware

button and it is now safe to remove the attached USB device.

USB 3.0 port
USB 2.0 port

The LED color indicates the speed: white for Gigabit Ethernet connections and amber for
100 Mbps or 10 Mbps Ethernet connections.
• Solid. A powered-on device is connected to the Ethernet port.

• Blinking. The port is sending or receiving traffic.

• Off. No device is connected to this Ethernet port.

Ethernet ports 1–4

User Manual

Hardware Setup

Nighthawk X6 AC3000 Tri-Band WiFi Router

Содержание Nighthawk X6 AC3000 R7850










































































































































































Результаты поиска

Содержание Nighthawk X6 AC3000 R7850

Отзывы:

Похожие инструкции для Nighthawk X6 AC3000 R7850

Бренды по названию

Популярные бренды

NETGEAR Nighthawk X6 AC3000 R7850, Руководство пользователя

Результаты поиска

Содержание Nighthawk X6 AC3000 R7850

Отзывы:

Похожие инструкции для Nighthawk X6 AC3000 R7850

Бренды по названию

Популярные бренды