e. Click the
APPLY
button.
Your settings are saved. The new VLAN shows in the 802.1Q-BASED VLAN
CONFIGURATIONS (BASIC MODE) pane.
f. Click the
Port Configuration
tab.
The 802.1Q PORT CONFIGURATIONS pane displays
g. For each port that you want to make a member of the new VLAN, select the VLAN
from the
VLAN
menu for the individual port.
Note:
If ports are members of the same LAG, you must assign them to the same
VLAN.
7. For a port that functions in access mode, to add a VLAN by using the
VLAN
menu
for the individual port, do the following:
a. From the
VLAN
menu for the individual port, select
Add VLAN
.
The BASIC 802.1Q VLAN pop-up window opens.
b. In the
VLAN Name
field, enter a name from 1 to 14 characters.
c. In the
VLAN ID
field, enter a number from 1 to 4093.
d. Click the
APPLY
button.
The pop-up window closes. The VLAN is added as a possible selection in the
VLAN
menu for each individual port.
e. For each port that you want to make a member of the new VLAN, select the VLAN
from the
VLAN
menu for the individual port.
Note:
If ports are members of the same LAG, you must assign them to the same
VLAN.
8. Click the
SAVE
button.
Your settings are saved.
Note:
For information about assigning the port mode, see Assign the Port Mode
in a Basic 802.1Q VLAN Configuration on page 55.
Assign the Port Mode in a Basic 802.1Q VLAN Configuration
In an 802.1Q VLAN configuration, you can assign one of the following port modes:
•
Access mode
. A port that functions in access mode can belong to a single VLAN
only and does not tag the traffic that it processes. You would typically use access
User Manual
55
Use VLANS for Traffic
Segmentation
Nighthawk S8000 Gaming & Streaming Advanced 8-Port Gigabit Ethernet Switch (GS808E)
