NETGEAR MP101 - Network Audio Player, Руководство пользователя

Страница: 13 / 48

User’s Manual for the MP101 Digital Music Player
Setting Up the MP101 1-5
– Install the MP101 Server Software to play music stored on your computers.
– Install RHAPSODY Digital Music Service to take advantage of a 30-day free trial to play
music from their vast collection of recordings.
Note:
RHAPSODY Digital Music Service is only available in the United States.
– View Documentation Resources allows you to view a soft copy of the Installation Guide
and this manual.
3.
Follow the InstallShield Wizard steps, click Finish when done, and restart your computer as
needed.
4.
The Media Server software will automatically run. You can optionally scan your hard drive to
locate your music files.
Next, Connect the MP101
The MP101 Digital Music Player connects your home computer network to your audio system.
1.
Connect the provided RCA cable from the MP101 Digital Music Player to your audio system.
Alternately, you can connect headphones or powered speakers to the mini-jack output, which
is volume controlled using the remote control.
2.
Connect the MP101 to your network.
Note : The MP101 is set from the factory to automatically receive its network settings via
DHCP. If DHCP is not running on your network, you will have to set up the IP address of the
MP101 in the range of addresses on your network.
– For Ethernet networks, connect via the Ethernet port.
AU X DV D V IDEO2
CD/S ACD
M D/TAPE V IDEO1
S PEAK ER S
AC OU TLET
ANTENNA
DIG ITAL
MP101 Digital Music Player
Receiver
Line
Out Audio
Out
Ethernet
L R
Digital Music Player
MP101
SERIAL
Power
7.5VDC, 1.0A
Reset