NETGEAR MA 301, Справочное руководство

Страница: 19 / 20

16
Encryption
Encryption Set the data encryption level for the wireless node. The data encryption level
must be the same between all wireless nodes and access points in the same
network. The possible values for the data encryption level are Disable, 64
bits and 128 bits. 64-bit data encryption is also called 40-bit data
encryption by some vendors. For more explanation on data encryption,
please refer to the wireless network fundamental chapter at the beginning of
this reference guide.
Setting the data encryption level to Disable is to not use any encryption; this
is also called Open System data encryption. Setting the data encryption level
to 64-bit configures the wireless node to use the 40-bit (also called 64-bit)
Shared Key data encryption method. 128-bit encryption is another possible
Shared Key data encryption method.
WEP Key
Entry/Passphrase
A 32-character (maximum) passphrase can be used to generate the
encryption key when using the Shared Key (64-bit or 128-bit) data
encryption method. However, this field is only visible when entering the
passphrase for the first time. When the encryption folder tab is open for the
second time, the passphrase will not be visible. Make a note of the
passphrase when providing it to the wireless node, as this information is
needed for all other wireless nodes on the same network.
WEP Key
Entry/Manual
Entry
The encryption key used to encrypt/decrypt wireless data. When set to 64-bit
(also called 40-bit) data encryption mode, you may specify up to four
different keys to encrypt wireless data. However, only one key is allowed in
the 128-bit data encryption mode.
Default Tx When the encryption level is set to 64-bit (also called 40-bit by some other
vendors), the wireless LAN configuration utility allows you to specify up to
four different keys to encrypt wireless data. The Default Tx field allows you
to specify which one of the four keys to activate.
About
The About screen shows the release information of the wireless LAN configuration utility software and the
wireless nodes firmware.