February 2014
4G LTE not available in all areas. See your service provider for complete coverage details. LTE is a
trademark of ETSI. NETGEAR, the NETGEAR logo, and NETGEAR genie are trademarks and/or
registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries.
Other marks are the property of their respective owners. © 2014 NETGEAR, Inc. All rights reserved.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134 USA
Install the Router
1.
Connect the power adapter to the router and plug it into an electrical outlet.
2.
If no LEDs light, press the
Power On/Off
button on the rear panel to power
on the router.
3.
Connect your router to a computer.
To connect from your wireless device using WiFi, use the WiFi network
name and password on the router label.
For a wired connection, use an Ethernet cable to connect your computer to
an unused yellow Ethernet LAN port on your router.
To connect wirelessly, press the
WPS
button
on the front of the router.
Within two minutes, press the
WPS
button on your wireless device, or follow
the WPS instructions that came with the device. For more information, refer
to the user manual at
.http://www.netgear.com
.
Note:
If you purchased the router online, you might need to provide ICCID and
MEID(DEC) values to activate the router. These values display on the product
packaging.
USB
Ethernet
WAN
Power
Power
port
LAN ports 1–4
ports
Antenna
Antenna
connector
connector
connector
On/Off
Use a Web Browser to Access the Router
When you connect to the network, you can use a web browser such as Chrome,
Firefox, or Internet Explorer to access the router to view or change its settings.
1.
Launch a web browser from a computer or wireless device that is
connected to the network.
2.
Type
http://routerlogin.net
or
http://www.routerlogin.com
in the
address field of the browser.
A login screen displays.
3.
Enter your user name and password.
The default user name is
admin
and the default password is
password
.
The BASIC Home screen displays.For more information, refer to the
4G
LTE Router (LG2200D) User Manual
on
http://www.netgear.com
.
4.
To verify the mobile Internet signal quality, check the Signal Quality LED
.
To improve signal quality, adjust the antennas or move the router.
When the router connects to the Internet, the Internet LED
lights
white.
Once you have set up your router, you can use NETGEAR genie for tasks such
as creating parental controls, changing your security settings, and monitoring
your Internet usage.
Note:
If the router cannot detect the SIM card, the message
No SIM Card
Detected
displays and the NETGEAR genie Mobile Internet pane shows
Not
Connected
. If you see this message, unplug the router and reseat the SIM card.
LEDs
The front panel of the router includes the following LEDs and buttons:
Signal Quality of the mobile broadband service
Power
Internet
Ethernet LAN ports 1–4
USB ports
WAN Internet port
WiFi On/Off button
WPS button
Troubleshooting
If the login screen does not display, try the following:
•
Close and reopen the browser.
•
Make sure that your computer is connected to one of the four yellow Ethernet
LAN ports on the router, or that you are connected to your WiFi network.
•
Make sure that the router has full power, and that its Power LED
is lit.
•
If your computer is set to a static or fixed IP address, change it to obtain an IP
address automatically from the router.
