1
Introduction and Hardware Overview
This manual is for the following NETGEAR
®
LTE Modem LB2120 models:
•
LB2120-100AUS. Data model with one LAN and one WAN Gigabit Ethernet port and with band support for
the Australia, New Zealand, and Oceania region.
•
LB2120-100EUS. Data model with one LAN and one WAN Gigabit Ethernet port and with band support for
the Europe, South Africa, and Middle East region.
•
LB2120-100NAS. Data model with one LAN and one WAN Gigabit Ethernet port and with band support for
the North America region.
The LTE Modem LB2120 provides two Gigabit Ethernet ports: one LAN port for connection to a router, switch,
hub, or computer and one WAN port for connection to a wireline broadband modem in support of automatic
failover to mobile broadband if the wireline broadband modem goes down.
This chapter provides an introduction and hardware overview of the LTE Modem LB2120 and contains the
following sections:
•
on page 7
•
Supported Mobile Broadband Bands
on page 7
•
on page 8
•
on page 8
•
on page 11
•
Back Panel With Ports, Connectors, and Button
on page 12
•
on page 12
•
on page 13
•
on page 14
For more information about the topics that are covered in this manual, visit the support website
at
Note
Firmware updates with new features and bug fixes are made available from time to time at
. You can check for and download new firmware manually. If
the features or behavior of your product does not match what is described in this guide, you
might need to update your firmware.
Note
6