NETGEAR GSM7328FS - ProSafe Switch - Stackable Скачать руководство пользователя страница 2

Publication Version 1.0, March 2006

© 2006 by NETGEAR, Inc. All rights reserved. Information is subject to change without notice. 

Trademarks

The Netgear Logo, the Gear Guy, Everybody’s connecting, and ProSafe are trademarks or registered trademark of 
Netgear, Inc. in the United States and other countries. Microsoft, Windows, and the Windows logo are trademarks or 
registered   trademarks of Microsoft Corporation in the United States and/or other countries. Other brand and product 
names are trademarks or registered trademarks of their respective holders. 

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to 
make changes to the products described in this document without notice.

NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit 
layout(s) described herein.

Certificate of the Manufacturer/Importer

It is hereby certified that the NETGEAR ProSafe 24-Port 10/100/1000 L3 managed Stackable Switch with 4 High-speed 
I/O Module Bays GSM7328S has been suppressed in accordance with the conditions set out in the BMPT-AmtsblVfg 
243/1991 and Vfg 46/1992.The operation of some equipment (for example, test transmitters) in accordance with the 
regulations may, however, be subject to certain restrictions. Please refer to the notes in the operating instructions. 

It is hereby certified that the NETGEAR ProSafe 48-Port 10/100/1000 L3 managed Stackable Switch with 4 High-speed 
Module Bays GSM7352S has been suppressed in accordance with the conditions set out in the BMPT-AmtsblVfg 243/
1991 and Vfg 46/1992.The operation of some equipment (for example, test transmitters) in accordance with the 
regulations may, however, be subject to certain restrictions. Please refer to the notes in the operating instructions. 

Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market and 
has been granted the right to test the series for compliance with the regulations. 

Voluntary Control Council for Interference (VCCI) Statement

This is Class A product based on the standard of the Voluntary Control Council for Interference by Information 
Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio interference may occur, in 
which case, the user may be required to take corrective actions.”

Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 

This device may not cause harmful interference. 

This device must accept any interference received, including interference that may cause undesired operation. 

Note:

 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and 
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to 

Содержание GSM7328FS - ProSafe Switch - Stackable









































Отзывы: