NETGEAR GC110 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 38

background image

LEDs

This section describes the LED designations of the switch.

Table 2. LEDs on the back panel

Description

LED

Solid blue. The switch is connected to the cloud server and is set up to be managed
by the NETGEAR Insight app.
Off. The switch is not connected to the cloud server or is set up to be managed by
the local browser UI.

Cloud Connection LED

Solid green. The switch is powered on.
Solid amber. The switch is booting.
Off. Power is not supplied to the switch.

Power LED

Off. Sufficient (more than 7W of) PoE power is available.
Solid amber. Less than 7W of PoE power is available.
Blinking amber. At least once during the previous two minutes, less than 7W of PoE
power was available.

PoE Max/Fault LED
Model GC110P only

Off. No link is established.
Solid green. A valid 1 Gbps link is established.
Blinking green. The port is transmitting or receiving packets at 1 Gbps.
Solid amber. A valid 10 Mbps or 100 Mbps link is established.
Blinking amber. The port is transmitting or receiving packets at 10 Mbps or 100
Mbps.

RJ-45 left LED
Link, speed, and activity for
Ethernet ports 1 to 8

Off. The port is not delivering PoE power.
Solid green. The port is delivering PoE power.
Solid amber. A PoE fault occurred.

RJ-45 right LED
PoE status for Ethernet ports
1 to 8 for model GC110P
only

Off. No SFP module link is established.
Solid green. A valid 1 Gbps link is established.
Blinking green. The SFP fiber port is transmitting or receiving packets at 1 Gbps.

Link/ACT LED
Link and activity for SFP fiber
ports 9 and 10

Table 3. LEDs on the front panel

Description

LED

Solid blue. The switch is connected to the cloud server and is set up to be managed
by the NETGEAR Insight app.
Off. The switch is not connected to the cloud server or is set up to be managed by
the local browser UI.

Cloud Connection LED

Solid green. The switch is powered on.
Solid amber. The switch is booting.
Off. Power is not supplied to the switch.

Power LED

Hardware Installation Guide

15

Hardware Overview

Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports

«
...
13
14
15
16
17
...
»

Содержание GC110







































Отзывы:

Нет отзывов

Похожие инструкции для GC110

ShareCenter Quattro DNS-345

Бренд: D-Link Страницы: 40

ShareCenter Quattro DNS-345

Бренд: D-Link Страницы: 4

ShareCenter DNS-343

Бренд: D-Link Страницы: 12

AirPlus G DWL-G710

Бренд: D-Link Страницы: 5

MYDLINK DNR-322L

Бренд: D-Link Страницы: 4

mydlink DNR-312L

Бренд: D-Link Страницы: 8

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 16

Бренд: D-Link Страницы: 88

Бренд: Makita Страницы: 2

3CR860-95 - OfficeConnect Secure Router

Бренд: 3Com Страницы: 2

Бренд: 3Com Страницы: 26

Бренд: Tripp Lite Страницы: 3

Fan Tray 8820-S2-900

Бренд: Paradyne Страницы: 6

Бренд: IBASE Technology Страницы: 39

CyberSWITCH CSX101

Бренд: Cabletron Systems Страницы: 72

Бренд: B+B SmartWorx Страницы: 50

Бренд: Cradlepoint Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды