NETGEAR GA622T - Copper Gigabit Ethernet Card, Справочное руководство

Страница: 24 / 57

Table 3-1. Parameter Descriptions (continued)
Property Description
Pause Frames Count IEEE 802.3x flow control settings help fine-tune network performance by
preventing dropped packets.
Pause Frames High Threshold IEEE 802.3x flow control settings help fine-tune network performance by
preventing dropped packets.
Pause Frames Low Threshold IEEE 802.3x flow control settings help fine-tune network performance
by preventing dropped packets.
Receive Buffer Count Specifies hardware resources in memory used to receive packets.
Transmit Buffer Count Specifies hardware resources in memory used to send packets.
Increasing this value may increase transmit performance.
Moving the Network Card to a Different Slot
Windows 98 automatically detects the installation and removal of hardware. To move
a GA622T Copper Gigabit Ethernet Card to a different slot in the same system:
1. Shut down the system and remove the card from the PCI slot.
2. Install the card in its new PCI slot (see “Installing Your Copper Gigabit Ethernet
Card” on page 2-7).
3. When the system is powered on, reinstall the driver software (see “Installing the
Driver Software” on page 3-1).
Windows 95OSR2/98/Me driver software 3-7
GA622T.Manual.FINAL 3/1/01 11:20 AM Page 25