Managed Layer 2 Switch with 2 Gigabit Ethernet Ports FSM726E Hardware Installation Guide
A-2
Factory Default Settings and Technical Specifications
v1.0, November 2008
Technical Specifications
Port mirroring
Disabled
Traffic prioritization
Disabled
ACL
Disabled
GVRP
Disabled
GMRP
Disabled
MAC address aging
300 seconds
SNMP community
Public (read-only access), private (read/write access)
VLAN Ingress filtering
Enabled
Table A-2. Technical Specifications
Feature
Description
IEEE network protocol and
standards compatibility
• 802.3 10BASE-T
• 802.3u 100BASE-TX
• 802.3z 1000BASE-SX
• 802.3ab 1000BASE-T
• 802.3x flow control
Interface
(Auto Uplink on all RJ-45 ports)
• 24 RJ-45 connectors for 10BASE-T and 100BASE-TX
• 2 Gigabit Interface converter (SFP) slots for SFP modules
• 2 RJ45 ports for 10BaseT, 100BaseT, and 1000BaseT
• RS-232 console port
Performance
• Forwarding modes: store-and-forward
• Bandwidth: 8.8Gbps
• Network latency: Less than 15 microseconds for 64 byte frames in
store and forward mode for 100 Mbps to 100 Mbps transimission
Address database size
16K media access control (MAC) addresses per system
Addressing
48-bit MAC address
10/100/1000 buffer memory
1-MB embedded memory
Acoustic noise (ANSI-S10.12)
36.6 dB
Heat dissipation
50 BTU/hr.
Mean time between failure (MTBF) 562,110 hours (~ 64.2 years)
Table A-1. Default Configuration Settings (continued)
Features
Default Setting